Table of Contents
- How Do You Test for Mould Exposure in Your Home?
- 1. Look for Visible Mould and Staining
- 2. Follow the Musty Smell
- 3. Check Hidden Spots for Mould Growth
- 4. Use a Moisture Meter or Hygrometer
- 5. Track Your Water Damage History
- 6. Understand DIY Mould Testing Limitations
- 7. What Do Professional Mould Inspectors Test?
- 8. Fix Moisture Before You Clean
- 9. Your Rights as a Renter in NSW
- Can Mould Exposure Affect Your Health?
- References
- Frequently Asked Questions
Last Updated: October 1, 2026
How Do You Test for Mould Exposure in Your Home?
You test for mould exposure in your home by looking for visible growth and staining, following a musty smell, checking hidden spots, measuring moisture with a meter or hygrometer, and reviewing your water damage history. DIY kits have real limits, and a professional inspector can help find hidden mould. Australian health advice is to fix leaks, plumbing problems, roofs and other building faults that create dampness, so mould does not keep spreading.¹
In Short To test for mould exposure in your home, use your eyes and nose first, then a moisture meter or hygrometer, and treat DIY test kits with caution. Find the water before you clean, or the mould comes back. If you have breathing symptoms, see a doctor, and bring photos and dates. Tonight, walk through the house with a torch and photograph every damp or stained patch you find.
You probably know the smell already. The cupboard under the laundry sink. The back of the wardrobe against the cold wall. The towel that never quite dries.
Here is the part most guides skip. You cannot test your way out of a moisture problem. Find the water first, or the mould comes back.
1. Look for Visible Mould and Staining
Start with your eyes. Visible mould is the simplest and most reliable sign of a moisture problem, and it costs nothing to check.
Walk each room and look for:
- Black, green or grey speckles on walls and ceilings
- Yellow or brown water stains
- Paint that bubbles, peels or flakes
- Dark patches along skirting boards
- Discolouration on curtains, bedding or stored clothing
Mould often grows in clusters rather than single spots. Where you see one patch, look nearby. The NSW Health mould fact sheet notes that mould needs moisture and nutrients to grow, so any visible growth points to a moisture problem that needs to be found and repaired.²
Write down what you see and where. That record helps later if you rent, or if you call a professional.
2. Follow the Musty Smell
Your nose is a useful tool. A musty, earthy smell usually means mould is growing somewhere you cannot see.
The smell comes from microbial volatile organic compounds (mVOCs), gases that mould releases as it grows.³ It is often strongest in enclosed spaces:
- Wardrobes and cupboards
- Under sinks
- Laundry rooms
- Bathrooms with poor ventilation
- Carpeted rooms that have been wet
Trust the smell even when you see nothing. A common mistake is to assume a damp smell is “just the house”. It usually is not. It is a clue pointing to hidden moisture.
If the smell is strongest in one room, start your search there.
3. Check Hidden Spots for Mould Growth
Mould hides where air does not move and moisture collects. These are the spots people miss.

Check these areas with a torch:
- Behind wardrobes and large furniture
- Under sinks and around pipework
- Window frames and sills
- Air conditioning ducts and vents
- Subfloors, especially timber
- Behind wall pictures and mirrors
- Inside roof spaces after heavy rain
Pull furniture away from external walls. In many homes, the gap between a wardrobe and a cold wall traps damp air. That is where mould starts.
If a spot smells musty and feels cool or damp, mark it for a closer look.
4. Use a Moisture Meter or Hygrometer
A moisture meter and a hygrometer give you numbers instead of guesses. Both are inexpensive and easy to use.
A moisture meter measures water content in building materials like timber, plaster and carpet. A hygrometer measures relative humidity in the air. High readings on either point to conditions where mould can grow.
|
Tool |
What it measures |
Where to use it |
What to watch |
|---|---|---|---|
|
Moisture meter |
Water in materials |
Walls, floors, timber |
Compare damp areas with dry ones |
|
Hygrometer |
Air humidity |
Room air, cupboards |
Levels above 60% support mould |
|
Humidity readings |
Long-term trend |
Whole home |
Rising trends after rain |
Take readings in several rooms and compare.
5. Track Your Water Damage History
Old water damage is a common cause of hidden mould. The leak may be repaired, and the damp material stays.
Ask yourself:
- Has a pipe ever burst or leaked?
- Has the roof or ceiling ever stained?
- Has a washing machine or dishwasher overflowed?
- Has the home ever flooded?
- Was there a slow leak under a sink?
Write the answers down with rough dates. A timeline is useful to an inspector, a landlord and a doctor.
6. Understand DIY Mould Testing Limitations
DIY mould test kits are widely sold, and their limits matter. Many use a settle plate that you leave open in a room, then send away for a count.
What Happens at My First Appointment? →
What DIY kits can and cannot do:
- Can: show that spores are present in the air
- Cannot: locate the source
- Cannot: measure your exposure over time
- Cannot: tell you if the mould is affecting your health
7. What Do Professional Mould Inspectors Test?
A professional inspector does more than a kit. They assess moisture, air and materials together, then explain what the results mean for the building. Results cannot show whether mould is affecting your health, because there are no health guideline values to compare them with.
An inspector may use:
- Air sampling to count spores in the air and compare indoor levels with outdoor levels
- Surface sampling to confirm what is growing on a material
- Moisture mapping to trace the water source
- ERMI testing, which analyses mould DNA in household dust to build a mould index. Ask the inspector what the result will and will not tell you before you pay for it.
8. Fix Moisture Before You Clean
Cleaning mould without stopping the moisture is wasted effort. The growth is likely to return.
Find and stop the water first:
- Repair leaks in pipes, roofs and gutters
- Improve ventilation in bathrooms and kitchens
- Dry wet materials within a day or two
- Deal with rising damp or drainage issues
- Run exhaust fans and open windows
Never mix cleaning products. Some combinations release harmful fumes.
9. Your Rights as a Renter in NSW
If you rent, you have rights when mould affects your home. The NSW Government guide to mould in a rental property sets out that landlords must keep the property in a reasonable state of repair, and that adequate ventilation is one of the seven minimum standards a property must meet to be fit to live in.⁴
In practice, this means:
- Report mould to your landlord or agent in writing
- Keep photos and dates
- Ask for the moisture source to be repaired, not just cleaned
- Follow up if repairs do not happen
Can Mould Exposure Affect Your Health?
Mould is a known trigger for asthma, allergies and breathing symptoms. It can make existing conditions worse, especially in children and people with low immunity. That part is well accepted, and is reflected in the Australian Government’s clinical pathway on indoor damp and mould.⁵
Watch for these red flags and seek medical care:
- Worsening asthma
- Breathlessness or wheeze, especially in children
- New or ongoing cough
- Symptoms in people with low immunity
Many people sit on symptoms like these for a long time. Dr Maria Mackey sees it often:
“The men and women I see have often left things way too long.”
What a Medical Assessment Actually Looks At
A medical assessment looks at your symptoms and rules out other causes. It does not assume mould is behind everything.
Think of it like a smoke alarm. The alarm tells you something is wrong. It does not tell you whether the cause is burnt toast or a wiring fault. A doctor’s job is to find the cause, not just silence the alarm.
A first appointment usually covers:
- Your symptom pattern, including when it started and what makes it better or worse
- Your home and work environment, including any damp or water damage
- Your history of asthma, allergies or immune conditions
- A physical examination, with attention to your lungs, nose and skin
- Blood tests or lung function tests where they are clinically indicated
At Mojo Klinik, we take a full hour, so there is time for the whole environmental history. Your GP stays your GP. We run in parallel.
What to Bring to Your Appointment
A short written summary helps. Include:
- When symptoms started, and whether they track with time spent in one room or building
- Any visible mould, damp or water damage you have found, with photos
- Any inspection or moisture report you have had done
- Medicines you take, including inhalers and antihistamines
- Questions you want answered
Take one question with you: “Could anything in my home or work environment be part of this, and what else could explain it?”
You do not need a diagnosis to ask for help. You need a clear description of what has changed.
A home that makes you unwell is exhausting to live in. You deserve both a dry house and a proper answer.
References
- Australian Centre for Disease Control. Preventing mould exposure. https://www.cdc.gov.au/advice/preventing-mould-exposure
- NSW Health. Mould: fact sheet. https://www.health.nsw.gov.au/environment/factsheets/Pages/mould.aspx
- United States Environmental Protection Agency. What does mold smell like? https://www.epa.gov/mold/what-does-mold-smell
- NSW Government. Mould in a rental property. https://www.nsw.gov.au/housing-and-construction/rules/mould-a-rental-property
- Australian Centre for Disease Control. Biotoxins: indoor damp and mould clinical pathway. 2025. https://www.cdc.gov.au/system/files/2025-10/biotoxins-indoor-damp-and-mould-clinical-pathway_0.pdf
Medically reviewed by Dr Maria Mackey, MBChB FRACGP FAARM Dip Hom. Integrative medical doctor, Neutral Bay, Sydney. AHPRA MED0000954798.
This is general information, not medical advice, and does not replace a consultation. Individual results vary and depend on your health history. Every treatment at Mojo begins with a medical assessment. Concerns about your care can be raised with us directly or with AHPRA via ahpra.gov.au.
Dr Maria Mackey, MBChB FRACGP FAARM Dip Hom. Registered medical practitioner (general registration). AHPRA MED0000954798.
Frequently Asked Questions
How can I tell if there is mould in my house?
Start with your senses. Look for visible black, green or grey patches and water staining on walls, ceilings and window frames. A persistent musty smell often points to hidden mould behind wardrobes, under sinks or in air conditioning ducts. Check subfloors and areas with past water damage. A moisture meter or hygrometer can confirm damp conditions that allow mould to grow. If you cannot find the source, an independent inspector can help.
Are DIY mould test kits accurate?
Most DIY kits use settle plates that collect spores from the air over a set period. They cannot tell you the source, the extent or whether the spores are affecting your health, and there are no health guideline values to compare results with. They may show that spores are present, which is true in almost every home. For a more useful assessment, look for visible mould and damp, use a moisture meter, and consider an occupational hygienist if you suspect hidden mould.
What are the health risks of mould exposure?
Mould is a known trigger for asthma, allergies and breathing symptoms. A 2018 House of Representatives inquiry into biotoxin-related illness recommended more research into chronic inflammatory response syndrome (CIRS), and current Australian Government guidance states that CIRS is not a recognised disease in Australia, with no validated diagnostic criteria. It is not a settled diagnosis. If you have worsening asthma, breathlessness, wheeze in children or symptoms while your immunity is low, see a doctor. A medical assessment looks at your symptoms and rules out other causes.
When should I hire a professional for mould inspection?
Hire a professional when you smell mould but cannot find it, when mould keeps returning after cleaning, or when the affected area is large. An occupational hygienist or independent inspector can look for hidden mould and moisture, and may take air or surface samples. They can also check hidden cavities with thermal imaging. Choose an inspector who does not also sell remediation, so the assessment stays independent.
What are my rights as a tenant regarding mould in NSW?
In NSW, landlords must provide premises in a reasonable state of repair and comply with health and safety laws. If mould is caused by a building fault such as a leaking roof or rising damp, you can report it to your landlord or agent in writing. If they do not act, contact NSW Fair Trading for advice. Keep records of all communication. If the mould is from your own cleaning or ventilation habits, you may need to address it yourself.